Stuttgart Classica

Tel: 01386 701953

930 Engine Kit

11,995.00
Photo+02-05-2019%2C+9+25+19+am+%281%29.jpg
IMG_2814.JPG
IMG_2804.JPG
IMG_2816.JPG
IMG_2826.JPG
IMG_2824.JPG
IMG_2795.JPG
IMG_2813.JPG
IMG_2800.JPG
IMG_2806.JPG
IMG_2798.JPG
IMG_2803.JPG
IMG_2801.JPG
IMG_2797.JPG
IMG_2821.JPG
IMG_2802.JPG
IMG_2796.JPG
IMG_2805.JPG
IMG_2807.JPG
IMG_2809.JPG
IMG_2811.JPG
IMG_2812.JPG
IMG_2815.JPG
IMG_2817.JPG
IMG_2818.JPG
IMG_2819.JPG
IMG_2820.JPG
IMG_2822.JPG
IMG_2823.JPG
IMG_2827.JPG

930 Engine Kit

11,995.00

Porsche 930 Engine Kit

We have an extensive 930 engine build kit for sale.

The case is a 1976 model with oiling modification which adds oiling to #2 & #5 connecting rods, main journal #4 drilled larger to 3/16”, #4 main bearing fully grooved, oil hole enlarged to 3/16”, main bearings coated with dry film lubricant (supplied by Supertec).

Porsche 930 3.0 litre steel crankshaft, polished, cross-drilled centre main journal, standard main & rod journals.

Carrillo H-beam connecting rods, stock Porsche 930 length. Rod bearings coated by Supertec.

Oil pump - Porsche GT-2. Matching Porsche GT-2 short oil pump driveshaft

Sump plate for turbo scavenge pump return, -6AN male fitting.

Cylinder heads ported & flow tested. Intake ports increased from stock 32mm to 36mm, per Porsche, note race 930/934’s had 41mm ports, current 36mm port size flows as well as Carrera 911 41mm port (17% improvement versus stock 32mm port). Exhaust ports not increased in size, bowls ported & stainless sleeve ring installed, per Porsche, to smooth transition to MODE exhaust, 24% improvement in exhaust flow. Twin plug heads, original castings, SS valves, Elgin racing springs, retainers & locks. Lower valve covers machined for twin plugs.

Supertec twin plug distributor, Porsche 917 design with intermediate support bearing & stock base.

See below for a full list of items included.

Free UK postage on all our products!  We can ship this item worldwide, please ask for a quote.

More Info

Add To Cart

Porsche 930 Engine Kit

We have an extensive 930 engine build kit for sale.

The case is a 1976 model with oiling modification which adds oiling to #2 & #5 connecting rods, main journal #4 drilled larger to 3/16”, #4 main bearing fully grooved, oil hole enlarged to 3/16”, main bearings coated with dry film lubricant (supplied by Supertec).

Porsche 930 3.0 litre steel crankshaft, polished, cross-drilled centre main journal, standard main & rod journals.

Carrillo H-beam connecting rods, stock Porsche 930 length. Rod bearings coated by Supertec.

Oil pump - Porsche GT-2. Matching Porsche GT-2 short oil pump driveshaft

Sump plate for turbo scavenge pump return, -6AN male fitting.

Cylinder heads ported & flow tested. Intake ports increased from stock 32mm to 36mm, per Porsche, note race 930/934’s had 41mm ports, current 36mm port size flows as well as Carrera 911 41mm port (17% improvement versus stock 32mm port). Exhaust ports not increased in size, bowls ported & stainless sleeve ring installed, per Porsche, to smooth transition to MODE exhaust, 24% improvement in exhaust flow. Twin plug heads, original castings, SS valves, Elgin racing springs, retainers & locks. Lower valve covers machined for twin plugs.

Supertec twin plug distributor, Porsche 917 design with intermediate support bearing & stock base.

See below for a full list of items included.

Free UK postage on all our products!  We can ship this item worldwide, please ask for a quote.

List of parts included:

1 x 930 3.0 litre engine case

1 x ARP 930 fastener kit (new)              

1 x JE piston/ring set (New)                  

1 x LN Engineering barrel set (new)

1 x Carrillo rod set (new)

1 x pair Elgin Super C-2 camshafts                     

1 x set twin plug cylinder heads complete   

1 x Supertec/Bosch distributor        

1 x crankshaft      

1 x Clewett twin plug ignition wire set  

1 x Jerry Woods oil thermostat eliminator

1 x new rocker shaft

12 x valve adjusting nuts

12 x rocker arms

4 x sets RSR rocker shaft seals

12 x rocker shafts

12 x used rocker shafts

1 x lot of keyways & hardware

2 x sets chain ramps

1 x set pulleys & shims

1 x lot block hardware & oil pump spring

1 x lot oil pump springs, driveshaft & block hardware               

1 x set hydraulic tensioners

1 x set cam sprockets

2 x sets valve seals

2 x modified turbo scavenge pump drives

1 x modified oil pan & spacer

1 x set valve locks

1 x set chain rollers & Carrera tension guard hardware

1 x lot assorted gaskets & seals

1 x OEM oil vent cover

6 x cleaned & flow tested fuel injectors

6 x used fuel injectors from turbo 3.0 core

1 x Mode blow-off valve

2 x fabricated waste gate seats

2 x used waste gate vents

1 x waste gate mount

1 x lot exhaust & turbo gaskets

1 x lot turbo oil gaskets

2 x lost exhaust gaskets

3 x sets barrel copper sealing gaskets

1 x set head gaskets

1 x set aluminium block washers

2 x lots assorted block o-rings

1 x set assorted shims

2 x lots seals & o-rings

2 x sets intake gaskets

1 x set collapsible oil tube o-rings

1 x lot valve cover seals

9 x OEM oil tubes

1 x collapsible oil tube

1 x lot case studs

1 x set coated main bearings, std, modified with #4 grooved & coated

1 x set rod bearings, std

1 x set main bearings, std, not modified

2 x timing chains

1 x set intermediate shaft bearingss

1 x modified #4 main bearing, coated, std

1 x modified setup #4 main bearing, not coated, std, useful for tooling purposes

3 x spare rod bearings

1 x lot camshaft hardware

1 x waste gate bellows

1 x nose bearing

1 x lot sensors, distributor wires & plug boots

1 x cleaned, disassembled turbo scavenge pump

1 x set OEM injector blocks

1 x stock UUR

1 x stock Idle air bypass

1 x voltage regulator & OEM start injector        

1 x set used valve spring seats

1 x set used valve spring retainers

1 x lot long engine studs

1 x lot short engine studs

1 x Smart aluminum crank pulley

1 x lot crank pulley hardware

1 x lot engine case plugs

9 x small flywheel bolts

6 x big flywheel bolts

2 x lots misc. block heardware

1 x Pelican engine sheet metal hardware kit

1 x set valve cover aluminum washers

2 x OEM intercooler spacers

1 x long oil pump driveshaft

1 x lot various engine nuts

1 x Jerry Wood oil cooler eliminator & oil filter mount with oil filter

1 x lot assorted o-rings & seals

2 x sets plus OEM oil lines for tensioners & head oiling             

1 x oil pump

1 x intermediate shaft

1 x turbo scavenge pump & mount

1 x set case nuts & washers

1 x set case bolts

1 x lot case hardware

1 x Jerry Woods oil-in fitting

1 x modified oil vent

1 x control pressure line

1 x alternator duct

1 x lot fan shroud hardware

1 x turbo scavenge pump mount

1 x waste gate pipe      

1 x modified fuel head             

1 x turbo pipe

1 x pair chain covers

1 x lot sheet metal clips

1 x stock throttle body

1 x throttle arm

1 x front engine rubber seal

1 x lot turbo pipe sheet metal

1 x lot engine sheet metal                                  

1 x alternator, housing & fan

4 x lots used block hardware

1 x set used Carrillo rod bolts   

1 x waste gate disassembled, no spring

2 x waste gates, assembled with high pressure springs

1 x engine mounting bracket rear                    

2 x cam boxes

1 x set fan sheet metal

4 x twin plug valve covers                    

1 x pair chain boxes

1 x OEM fuel filter & accumulator

3 x Mahle engine oil filters

2 x engine wire harnesses              

1 x CIS air valve

1 x RUF turbo out pipe for OEM intercooler

1 x turbo mount bracket

1 x Zork tube & hardware

1 x throttle linkage

1 x modified oil pan              

1 x air cleaner assembly

1 x assorted engine tin ware

1 x set fuel injector lines

1 x 1976 intake manifold

1 x 1978 intake top

1 x OEM air cleaner